Adjustment Program For Epson L3250 Verified Best May 2026

The Epson L3250 Adjustment Program (also known as the Epson Resetter) is a specialized utility used to resolve critical maintenance errors, most notably the "Service Required" warning caused by a full waste ink pad counter. Summary of Key Capabilities

• Error Code: “A printer’s parts are at the end of their service life. Contact Epson Support.”
• Flashing Lights: All three ink LEDs and the power button flashing simultaneously.
• The 5,000-Page Wall: The L3250 is designed to request service after roughly 5,000 to 8,000 A4 pages printed, depending on ink coverage.
• Message Box: On Windows, you see “Service required. Parts inside the printer are near the end of their service life.”

: Once prompted, turn off your printer and then turn it back on to complete the reset. Troubleshooting Paper Issues If your query is specifically about paper feed or paper jam errors Physical Check adjustment program for epson l3250 verified

Phase 3: Running the Adjustment Program

1. Run the AdjProg.exe file as Administrator (Right-click > Run as Administrator).
2. Select your model: Epson L3250 Series from the dropdown.
3. Click "Particular adjustment mode" (do not use "Initial setting" unless you know what you are doing).
4. Select "Waste ink pad counter" from the menu.
5. Click "Check" to read the current counter values. You will see two numbers – Main (near 100%) and Backup (near 100%).
6. Click "Initialization" (or "Reset").
7. Wait for the progress bar. The program will display: "Initialization complete."
8. Turn off the printer, wait 10 seconds, then turn it back on. The error light should vanish.