Agent17 Hexatail Install May 2026

The Hexatail is a popular 3D-printed upgrade designed primarily for the Luxe Blaster series (such as the TM Luxe or rebranded equivalents). It replaces the standard stock back cap to provide a more ergonomic, skeletonized "tail" for tank mounting and improved shouldering.

Last updated: October 2025. This guide applies to Agent17 Hexatail hardware revision 3.0 and later. Always refer to the official datasheet for pinout variations on older units. agent17 hexatail install

**Step 5: Install

Download the firmware: Navigate to the official Agent17 portal → Downloads → Hexatail → hexatail_v3.2.1.bin (or latest stable).

Enter DFU mode: Press and hold the "Boot" button on the Hexatail’s hidden PCB (located under the third segment’s cover) while applying power. Release after 2 seconds. The status LED will blink blue.

Flash using the Agent17 Flasher:

agent17-flasher --port COM5 --baud 460800 --write hexatail_v3.2.1.bin

Verify checksum: The flasher will output a CRC32 match. Do not proceed if it fails – re-download the binary.

Update and install deps: sudo apt update && sudo apt install -y git python3 python3-venv python3-pip build-essential

Clone repo: git clone https://github.com/agent17/hexatail.git

Enter and create venv: cd hexatail python3 -m venv .venv source .venv/bin/activate

Install Python deps: pip install --upgrade pip pip install -r requirements.txt

(Optional) Install editable for dev: pip install -e .

Run migrations / setup (if applicable):

: Right-click your game shortcut or executable and select "Open file location." If you are using Steam, go to Manage > Browse local files Extract and Replace Open the patch archive. Drag and drop the contents (often a folder named or specific Download the firmware: Navigate to the official Agent17

PC (Windows/Mac): Download the compressed folder (.zip or .rar), extract the contents to a local directory, and run the executable file (e.g., Agent17.exe). Android (APK):

npm run build:agent17

Introduction to Agent17 Hexatail

Last updated: October 2025. This guide applies to Agent17 Hexatail hardware revision 3.0 and later. Always refer to the official datasheet for pinout variations on older units.

**Step 5: Install

Agent17 Hexatail Install: A Comprehensive Guide

Download the firmware: Navigate to the official Agent17 portal → Downloads → Hexatail → hexatail_v3.2.1.bin (or latest stable).
Enter DFU mode: Press and hold the "Boot" button on the Hexatail’s hidden PCB (located under the third segment’s cover) while applying power. Release after 2 seconds. The status LED will blink blue.

Flash using the Agent17 Flasher:

agent17-flasher --port COM5 --baud 460800 --write hexatail_v3.2.1.bin

Verify checksum: The flasher will output a CRC32 match. Do not proceed if it fails – re-download the binary.

Update and install deps: sudo apt update && sudo apt install -y git python3 python3-venv python3-pip build-essential
Clone repo: git clone https://github.com/agent17/hexatail.git
Enter and create venv: cd hexatail python3 -m venv .venv source .venv/bin/activate
Install Python deps: pip install --upgrade pip pip install -r requirements.txt
(Optional) Install editable for dev: pip install -e .
Run migrations / setup (if applicable):
: Right-click your game shortcut or executable and select "Open file location." If you are using Steam, go to Manage > Browse local files Extract and Replace Open the patch archive. Drag and drop the contents (often a folder named or specific

PC (Windows/Mac): Download the compressed folder (.zip or .rar), extract the contents to a local directory, and run the executable file (e.g., Agent17.exe). Android (APK):
```
npm run build:agent17
```
Introduction to Agent17 Hexatail