for the repair of pressure equipment. These methods are strictly governed by post-construction standards, as "patching" is typically considered an in-service repair method rather than a feature for new construction. 1. Primary Standard: ASME PCC-2 The core standard for "patched" repairs is ASME PCC-2, "Repair of Pressure Equipment and Piping"
In the context of ASME standards, "patching" refers to the application of reinforcement plates to damaged equipment. asme standard patched
Once a vessel is ASME standard patched, the clock restarts on corrosion monitoring. API 510 requires: for the repair of pressure equipment
| Method | When Preferred | ASME Reference | |----------------------|------------------------------------------|--------------------------| | Welded patch plate | Large thinned area, no cracking | PCC-2 Art. 301 | | Weld overlay | Smooth contour, erosion/corrosion damage | PCC-2 Art. 202 | | Grind & blend | Small defects (<10% wall) | PCC-2 Art. 201 | | Insert plate (full thickness replacement) | Through-wall damage, localized | PCC-2 Art. 303 | Qualified personnel : Only qualified personnel with the
Fatigue – Patching introduces stiffness discontinuities. For cyclic service, finite element analysis (FEA) per ASME Section VIII Division 2, Part 5 is recommended.
of pressure vessels. It generally does not include rules for "patches," as errors in new construction (like a misplaced nozzle hole) typically require replacing the entire plate rather than applying a patch. ASME PCC-2 : Focuses on post-construction repairs. It is used alongside inspection codes like (Pressure Vessels) or
If you want this tailored to a different ASME standard, a specific section, or a different company/authority format, tell me which standard and I'll adapt it.