G3400 Reset | Canon
The small office hummed, or rather, it to. Sarah’s Canon G3400, a workhorse affectionately named "Old Faithful" for its unending supply of vibrant ink, had fallen silent. The LCD panel wasn't just flashing; it was panicked—an alternating blink of green and orange signaling the dreaded Support Code 5B00.
- On the printer control panel, press Setup (gear icon).
- Use arrows to select Device settings → Reset settings.
- Choose:
- Don't turn the printer off and on repeatedly. Each power-on triggers a cleaning cycle.
- Print regularly. Infrequent printing causes clogs, requiring deep cleans (which waste huge ink).
- Use Canon brand ink. Third-party inks have different viscosities, causing more frequent automatic cleans.
- Install a Waste Ink Tank Mod. Advanced users can drill a hole in the back of the G3400 and route a tube to an external bottle. If you do this, you never need to change pads again—just reset the counter every few months.
- Reconfigure your printer settings, such as Wi-Fi and paper settings
- Run a test print to ensure that the printer is functioning correctly
- Monitor the printer's performance and adjust settings as needed
Release both buttons. The green power light should blink and then stay solid, indicating the printer is in Service Mode. Step 2: Resetting the Waste Ink Counter canon g3400 reset
She clicked.
Why Reset the Canon G3400?
when the ink absorber is full, as the pads are not intended to be user-replaceable. Canon Knowledge Base Final Verdict Canon G3400 reset The small office hummed, or rather, it to
- Turn off the printer.
- Press and hold the [Stop] button (or [Cancel] button) and the [Black] button (or [Color] button) simultaneously.
- While holding the buttons, plug in the power cord.
- Continue holding the buttons for 10 seconds.
- Release the buttons.