Chevron EW-32 is a versatile 7-day digital timer designed for home automation. This guide breaks down the essential steps to get your timer up and running, from initial setup to advanced scheduling. Initial Setup & Charging
Overview of the Chevron Digital Timer EW-32 chevron digital timer ew-32 user manual
Press UP/DOWN until "1 OFF" is displayed, then repeat the process to set the time the device should turn OFF. Chevron EW-32 is a versatile 7-day digital timer
ON.TIMER for 3 seconds.02:00 hours).TIMER again. The unit will count down and shut off automatically.again to navigate to the "OFF" setting for that program, then adjust the time and days as needed. Confirm each setting with the Operating Modes and Functions The timer features a dedicated ON/AUTO/OFF button to control its current behavior: Slide the override switch to ON
button. This clears any existing memory and restores factory defaults. Setting the Current Time Enter Time Mode : Press and hold the button for 3 seconds. Adjust Values buttons to cycle through and select the correct : Press the button to confirm each individual selection. Programming On/Off Schedules
Countdown (CDT): Use the - button to access a simple timer that turns off your device after a set period—great for slow-cookers or hair straighteners.
| Error | Meaning | Solution |
|-------|---------|----------|
| Blank screen | No power or dead battery | Plug timer into a live wall outlet. Replace CR2032 battery. |
| Flashing 12:00 | Power interruption | Reset the clock (see Section 3). Your programs may still be saved. |
| Device turns on/off at wrong time | AM/PM confusion | Check if 6:00 is AM vs PM. Also check the day program (Mo vs Tu). |
| Timer clicks but no power | Overload protection or tripped | Unplug all devices. Reset by unplugging timer for 10 minutes. |
| Can't set minute to 00 | Normal function | Press – when at 01 to roll back to 00. |