D-com 3.5g Movitel Download Setup !!top!! Link

D-com 3.5G Movitel Setup and Installation Guide Movitel D-com 3.5G USB modem

  1. Go to Tools → Options → Profile Management.
  2. Click New or Edit Default.
  3. Profile Name: Movitel 3.5G
  4. APN: movitel
  5. Username: (Leave blank – Movitel uses transparent proxy)
  6. Password: (Leave blank)
  7. Dial Number: *99# or *99***1#
  8. Click Save and Set as Default.
  • [ ] The .exe installer saved to a USB stick or Google Drive.
  • [ ] Movitel SIM with active data (try topping up 20 MZT for a 1-hour pass).
  • [ ] Your Windows product key (just in case).
  • [ ] A second device (phone) to Google a fix if the modem fails.

If you are repeatedly re-installing the D-COM 3.5G driver because the connection drops, consider upgrading your hardware. A second-hand Huawei E5573 (4G MiFi) will cost ~1,500 MZN and radically improve your experience. d-com 3.5g movitel download setup

Error 2: The Modem is detected as a "Storage Drive" (CD-ROM) only

  • Cause: The modem is stuck in "Mass Storage Mode" (like a pen drive) rather than "Modem Mode."
  • Fix: You need to send a "mode switch" command. Download Generic Card Reader Driver or remove the SIM card, plug the modem in, wait for the software to install, then insert the SIM card.

Troubleshooting

  • No installer: download latest D‑Link modem drivers from D‑Link support (search model-specific page).
  • SIM not recognized: test SIM in phone; ensure PIN disabled.
  • Slow/no data: confirm data balance, network mode (3G/Auto), and signal.
  • Modem stuck in storage mode: run usb-modeswitch (Linux) or reinstall drivers (Windows).
  • Ask Movitel support for APN specifics and network settings if standard APNs fail.

Below is a structured informational report based on common technical support issues, setup procedures, and software details for the D-Com 3.5G USB modem used on Movitel’s network. D-com 3