Dvb Select Type Error — Samsung Tv

The "DVB Select Type Error" on Samsung TVs typically occurs when the television's internal tuner fails to correctly identify or switch between digital broadcast standards (DVB-T, DVB-C, or DVB-S). This hardware-software mismatch often results in a "No Signal" message or a frozen setup screen. Core Causes of the Error

The "DVB Select Type" error on Samsung TVs typically occurs when the television's internal digital tuner encounters a mismatch between the broadcast signal type (e.g., DVB-T, DVB-C, or DVB-S) and the user's selected input or hardware configuration dvb select type error samsung tv

Power Cycle (The "Soft Reset"): While the TV is on, hold the Power button on your remote until the TV turns off and then back on again (usually about 10 seconds). The "DVB Select Type Error" on Samsung TVs

  • Try a different DVB mode:

    DVB-C (Cable): Use this if you have a direct cable connection from a provider without a separate set-top box. Try a different DVB mode : DVB-C (Cable)

    1. Contact Samsung support: Reach out to Samsung's customer support or technical team for further assistance.
    2. Visit a authorized Samsung service center: If your TV is still under warranty or you prefer professional help, visit an authorized Samsung service center for diagnosis and repair.
    • Action: Select DVB-T.
    • Next Step: The TV will scan for "Air" or "Terrestrial" channels. Choose your country and provider (e.g., "United Kingdom - Freeview" or "India - DD Free Dish").
    • If no channels found: Your antenna might be weak. Try moving it near a window. Do not choose DVB-C or DVB-S.

    Advanced Troubleshooting: When You Still Get "No Signal"

    You selected the correct DVB type, but the scan finds zero channels. Try these fixes: