Everstart Battery Charger 60108m Manual -

The Everstart Plus 60108M 25A 12V Smart Battery Charger is a versatile automotive tool designed to maintain and revive 12V lead-acid batteries. This "smart" charger automatically adjusts its output based on the battery's condition, offering features like rapid charging, engine start assistance, and battery reconditioning. Key Specifications and Features

Product Overview: What is the EverStart 60108m?

Before diving into the manual details, it is important to understand what this unit is and is not. The EverStart 60108m is generally a 6-amp, 12-volt fully automatic battery charger and maintainer. It is designed for lead-acid batteries, including standard flooded, AGM (Absorbent Glass Mat), and gel cell batteries. everstart battery charger 60108m manual

• Negative Ground: Most modern vehicles. The Negative post (marked "NEG" or "-") connects to the chassis.
• Positive Ground: Rare, found mostly on older vintage vehicles.

Why? This final connection away from the battery prevents sparking near hydrogen gas. The Everstart Plus 60108M 25A 12V Smart Battery

1. Plug charger power cord into AC outlet (120V).
2. Connect red (+) clamp to positive battery terminal.
3. Connect black (-) clamp to a solid engine block or chassis ground away from battery (not the negative terminal).

Specifications to verify in original manual (items to check against printed/manual copy)

• Exact model number labeling and any suffixes
• Manufacturer-stated input/output ratings (VAC, Hz, VDC, A)
• Supported battery chemistries and capacities
• Detailed charge profile (bulk/absorption/float voltages and currents)
• Warranty terms and service contact details
• Certifications and compliance marks (UL, CSA, CE, RoHS, etc.)
• Any restrictions (e.g., do not use on maintenance-free sealed batteries if not supported)

The 60108M is designed to handle a variety of "emergency" scenarios through its three primary output rates: Negative Ground: Most modern vehicles

Tip: If you are unsure, start with the 2 Amp setting to see if the battery accepts the charge, then switch to 10 Amps.

Issue 3: "The fan is loud or not spinning."

Solution: The 60108m uses a cooling fan. If it is silent after 10 minutes of charging, it may be jammed with debris. Unplug the unit and use compressed air to clean the vents. Do not disassemble; there are no user-serviceable parts inside.