Extra Landscaping Tools Patched May 2026
franchise. Recent reports and community updates highlight significant "patches" and fixes released to address compatibility issues following major game updates. Current Status & Recent Patches The original mod by BloodyPenguin for Cities: Skylines 1
- Files: flat, round, and a coarse mill file
- Diamond or sharpening stones (1000/6000 grit combo recommended)
- Small bench vise or clamp set
- Cold chisel, punch set, center punch
- Assorted sandpaper (80–400 grit) and waterproof 600–2000 grit for polishing
- Epoxy putty (metal-reinforced) and two-part structural epoxy (10–30 min working time)
- High-strength cyanoacrylate gel (CA) for quick fixes
- Stainless steel rivets (3–6 mm), pop rivet gun and rivets
- Bolts: 1/4", 5/16", and 3/8" grade 8 or stainless, with matching nuts and washers
- Lock washers and nylon-insert lock nuts (Nylock)
- Hardened steel washers (for bearing surfaces)
- Replacement blades and small spare hardware: screws, springs, cotter pins
- Welding gear (MIG or stick) — optional if you have skills and a safe workspace
- Heat-shrink tubing, stainless hose clamps, and small rubber mastic patches
- Coil-spring replacements (for manual tool return springs)
- Paint (rust-inhibiting primer + enamel) and lubricants: penetrating oil, 3-in-1, silicone spray
- Leather and synthetic gloves, safety glasses, face shield, ear protection
- Load a test save (not your main project).
- Sculpt operation – use maximum brush size + fastest mouse movement – check for lag spikes.
- Undo stack test – perform 5 actions, undo 5 times, redo 3 times – confirm no state corruption.
- Texture blend – paint three different ground types over a steep slope – check for flicker.
- Edge-of-map behavior – try smoothing at the absolute boundary – should not teleport brush to (0,0).
Reported Issue: Some users on older GPUs experience frame drops when using the Multi-Layer Blender on 8K textures. extra landscaping tools patched