Iso 2768-mh Tolerance Chart

ISO 2768-mh tolerance chart is a standardized system used in mechanical engineering to simplify technical drawings by defining general tolerances for linear and geometrical dimensions without specific indications. The designation "mH" refers to a combination of two specific precision classes: (Medium) for linear and angular dimensions and for geometrical tolerances (form and position). Overview of ISO 2768

To implement this, simply add a note in or near the title block of your technical drawing: General Tolerances: ISO 2768-mh When NOT to Use It

Symmetry

| Nominal Size Range (mm) | Tolerance (mm) | |------------------------|----------------| | ≤ 100 | 0.2 | | >100 to 300 | 0.3 | | >300 to 1000 | 0.4 | | >1000 to 3000 | 0.5 |

| Nominal Angle Range | Tolerance Class 'm' | | :--- | :--- | | Up to 10mm length of shorter side | ±1° | | >10mm up to 50mm | ±0°30' (30 arc minutes) | | >50mm up to 120mm | ±0°20' (20 arc minutes) | | >120mm up to 400mm | ±0°10' (10 arc minutes) | | >400mm | ±0°5' (5 arc minutes) |

Part 1: Linear Dimensions (Class 'm' - Medium)

These tolerances apply to dimensions like lengths, diameters, step heights, and radii.