: Located above the parameter head, this display clearly shows essential firing data and allows for quick parameter selection. Fully Automatic Vacuum Control ivoclar programat p90 manual fixed

Er 13: Temperature is too high (exceeding the T-value by more than ). Check for a faulty thermocouple or overheating. The Ivoclar Programat P90 Go to product viewer

Never touch the thermocouple or quartz tube with bare skin, as grease can damage them. Do not operate the furnace without a firing table. Troubleshooting Common Issues The furnace is stuck in a "Manual" operation

Ivoclar Programat P90 is a classic ceramic furnace valued for its reliability in dental laboratories. Maintaining this device according to the Programat P90 Operating Instructions is essential for ensuring precise firing results and extending the life of the heating muffle. Core Components and Setup

1. The furnace is stuck in a "Manual" operation state and will not run automatic programs.
2. A software or sensor error has occurred, and the user needs a fix (repair) using the manual override functions.

: Users generally review the P90 as a "workhorse." Its heating elements provide even temperature distribution, which is critical for consistent porcelain firing results. Ease of Use

Ivoclar Vivadent Programat P90

Firing Furnace – Operating Instructions (Fixed Edition)

Valid for firmware version 2.0 and higher
Document No.: 574731_rev_B