Iwata - 2crh Bundy Clock Manual
In the quiet, fluorescent-lit corner of the "Everlasting Plastics" office sat the Iwata 2CRH Bundy Clock
Sets the time the clock flips to a new day (default is 00:00) 05 Pay Period Set for Monthly, Weekly, or Bi-weekly ending days 13 Signal Duration Set duration (0–99 seconds) for the internal melody/alarm 56–73 Color Printing Schedule when the ribbon switches between Black and Red 3. Button Controls in Program Mode iwata 2crh bundy clock manual
Includes a time-programmable alarm that can play a musical melody to signal shift starts or ends. Card Alignment: In the quiet, fluorescent-lit corner of the "Everlasting
9. Troubleshooting
| Problem | Likely cause | Solution | |---------|--------------|----------| | No print | Ribbon dry or misaligned | Replace ribbon; reseat cartridge | | Card jams | Bent card or foreign object | Gently remove card; use Iwata-brand cards | | Wrong date | Manual not advanced | Turn date drum to correct date | | Clock runs slow/fast | Dirty synchronous motor | Clean motor rotor (unplug first) | | Red stamp never prints | Jumper in wrong position | Move J2 to OVT | | Grinding noise | Worn gear train | Contact Iwata service center | Removal: Pull the card straight out to verify
- Use the template to mark 4 screw holes (M5 or #10 screws).
- Secure to a solid wall – do not mount on drywall alone.
- Ensure the unit is plumb (use a spirit level) – tilt affects card feeding.
- Solution: First, check the ribbon. If the ribbon is new, check the "Impression Lever" inside the cover. This lever controls how hard the hammer strikes the card. Slide it towards "Max" or "Heavy" for a darker print.
