Mt6580 - Imei Repair Code

Here’s a concise review of the MT6580 IMEI repair code situation, based on common practices and tools used for MediaTek devices.

1. Power off your phone completely.
2. Open SN Writer as Administrator.
3. Select Smart Phone and USB VCOM.
4. In "IMEI Option", check both IMEI boxes.
5. Type your 15-digit IMEI numbers.
6. Click Start.
7. Connect your powered-off phone via USB. The tool will auto-detect the MT6580 in Meta Mode.
8. After 10 seconds, you'll see "PASS". Disconnect and reboot.

This is the most direct method to restore your IMEI using the device's built-in engineering menu. Open the Dialer : Enter the code *#*#3646633#*#* to access MediaTek Engineering Mode. Note: If this code doesn't work, try *#*#4636#*#* or use an "MTK Engineering Mode" app from the Play Store. Navigate to Connectivity : Swipe to the Connectivity tab and select CDS Information Radio Information Radio Information , then choose (for SIM 1) or (for SIM 2). Enter the Command For SIM 1: Type AT+EGMR=1,7,"YOUR_15_DIGIT_IMEI" For SIM 2: Type AT+EGMR=1,10,"YOUR_15_DIGIT_IMEI" Send Command SEND AT COMMAND . You should see a "Command sent" message. Tip: If you get an error, add a space after "AT+" (e.g., mt6580 imei repair code

is a widely used chipset in budget 3G smartphones. Users often seek "IMEI repair" when their device displays "Invalid IMEI" or "Null IMEI," typically after a factory reset, root attempt, or flashing a custom ROM. Without a valid IMEI, a phone cannot register on a cellular network to make calls or use data. Primary Repair Methods Here’s a concise review of the MT6580 IMEI

Common MT6580 Engineering Codes

Try these codes on your dialer pad:

Safety and best practices

• Always back up NVRAM/EFS before making changes.
• Use official or well‑known community tools and follow device‑specific guides.
• Keep a copy of the original IMEI and ownership proof.
• Avoid random IMEIs; use the originally assigned IMEI.
• If uncomfortable, seek a professional repair shop with proper legal authorization.

1. Root your device (e.g., via Magisk).
2. Install MTK Engineering Mode app from Play Store.
3. Open → MTK Settings → Connectivity → CDS Information.
4. Follow Method 1 steps (AT commands).
5. Reboot.

In some cases, the IMEI number on your device may become null or corrupted, which can prevent you from using your device on a cellular network. This can happen due to various reasons such as: Power off your phone completely

Dial the Secret Code: Open your phone's dialer and enter *#*#3646633#*#* to enter MTK Engineering Mode.