Owon Hds2102s Firmware Update Link

Official firmware updates for the OWON HDS2102S are typically managed through the OWON Download Center

Why Update Your Firmware?

Before diving into the "how," let's briefly discuss the "why." Firmware updates often bring significant benefits, including: owon hds2102s firmware update link

Also, I need to clarify that I don't have an actual link to the firmware update as I'm a text-based AI model and do not have have direct access to real-time information or links. You should verify the firmware update link from the official Owon website. Official firmware updates for the OWON HDS2102S are

4. Update Procedure

The HDS2102S does not support OTA (Over-The-Air) updates. The update must be performed via the USB Mass Storage interface. Format the USB drive

Official Recommendation: Owon has stated that if no newer firmware starting with your specific main version number (e.g., V4) is on their site, you should not attempt to upgrade. How to Update Your Firmware

Format the USB drive. Use a small capacity drive. The HDS2102S bootloader is picky.
Extract the ZIP. Inside, you will usually see two files: HDS200S.upg and Readme.txt.
Copy only the .upg file to the root directory of the USB drive. (Do not put it in a folder).
Power off the HDS2102S completely.
Insert the USB drive into the top USB port (not the USB-C charging port).
Hold down the "F1" button (the softkey directly below the screen on the left).
While holding F1, press the power button to turn the scope on.
Keep holding F1 until you see "Updating System..." appear on the screen.
Do not touch anything. The screen will go black. The LEDs may flash. This takes about 90 seconds.
Wait for the boot logo. Once it boots to the normal UI, the update is done.
Power cycle (turn off, wait 10 seconds, turn on).

Here is the information regarding the firmware update for the OWON HDS2102S.