Pacific Fitness Del Mar Home Gym Assembly Manual Fix Official

Pacific Fitness Del Mar Home Gym Assembly Manual

Step 2: Base Frame Assembly
Connect left and right base stabilizers. Attach bottom weight stack guide rods to base. pacific fitness del mar home gym assembly manual

• Weight stack: Typically 160 lbs to 210 lbs (selectable via pin)
• Stations: High pulley, low pulley, chest press (press arms), leg extension, and a lat pulldown bar.
• Cable length: Two main cables (upper and lower) usually measuring 98 inches and 112 inches respectively.
• Hardware sizes: Predominantly 3/8"-16 and 5/16"-18 bolts with nylon insert lock nuts.

3. Troubleshooting Common Issues

Problem: The weight stack sticks or "jumps" during use. Weight stack: Typically 160 lbs to 210 lbs

The Challenge of Obsolete Documentation

The first hurdle most owners face is that Pacific Fitness was eventually acquired by other entities (eventually absorbed into the Horizon Fitness and Johnson Health Tech family), and support for older legacy models like the Del Mar has dwindled. Original paper manuals are rare. chest press (press arms)

4. The Entertainment-Ready Finale

Once the last bolt is torqued, the manual transitions from builder to lifestyle curator. The final page isn’t a legal disclaimer—it’s a “First Workout Script.”

Place the top beam onto the main uprights. Secure with bolts and washers, ensuring the beam extends in the correct direction as per the diagram. 3. Weight Stack & Guide Rods Guide Rods:

Perform a few light repetitions on each station (Leg Extension, Lat Pulldown, Chest Press) to ensure the cables move freely without binding. National Gym Supply