Philips 55put6002 56 Software Update 【UPDATED — 2025】
To update your Philips 55PUT6002/56 Smart TV, you can use the built-in system menus if the TV is connected to the internet, or perform a manual update via a USB flash drive. Option 1: Update via Internet (Easiest)
Warning: What Not to Do
- Do not use the
/12(European) firmware. It will brick your/56tuner. - Do not turn off the TV during the "Updating - Do not remove USB" phase. This is the bootloader stage; interruption requires a motherboard replacement.
- Do not skip incremental updates. If you are on version 107, you usually cannot jump to 112. Install 107 → 109 → 112 sequentially.
Regular software updates are essential to ensure that your Philips 55PUT6002/56 TV runs smoothly, securely, and with the latest features. By following the steps outlined in this article, you can easily check for and update the software on your TV. If you encounter any issues during the update process, refer to the troubleshooting tips provided. With a software update, you can enjoy an enhanced viewing experience, improved performance, and peace of mind knowing that your TV is secure and up-to-date. philips 55put6002 56 software update
Step 1: Download the .zip file from the Philips support page.
Step 2: Extract the folder. Inside, you will find a file named autorun.upg (or similar).
Step 3: Copy ONLY the .upg file to the root directory of your USB stick. (Do not put it inside a folder).
Step 4: Turn off the TV. Unplug it for 30 seconds.
Step 5: Plug the USB into the side port (not the rear service port).
Step 6: Hold down the Joystick button (under the Philips logo on the bottom bezel) while plugging the power back in.
Step 7: Continue holding until you see a blue screen with a progress bar. To update your Philips 55PUT6002/56 Smart TV, you
are primarily intended to improve system stability, fix bugs like intermittent sound loss or random reboots, and update built-in applications. Do not use the /12 (European) firmware