Point-n-measure Digital Tape W5746 User Manual |verified| May 2026

Master Your DIY Projects: The Point-N-Measure Digital Tape W5746 Guide

11. Technical Specifications

| Specification | Details | |---------------|---------| | Model | Point-N-Measure W5746 | | Measurement range | 2 in – 50 ft (0.05 m – 15 m) | | Accuracy | ±1/8 inch (3 mm) | | Laser class | Class II, 650nm, <1mW | | Units | ft/in, decimal ft, meters | | Battery | 1 × 9V alkaline (6LR61) | | Auto shut-off | 90 seconds | | Operating temp | 32°F – 104°F (0°C – 40°C) | | Storage temp | 14°F – 140°F (-10°C – 60°C) | | Dimensions | 5.3 × 2.1 × 1.3 inches | | Weight | 4.2 oz (without battery) | Point-N-Measure Digital Tape W5746 User Manual

Use a Tripod or Stabilizer: For accurate measurements, use a tripod or stabilizer to keep the device steady.
Avoid Obstacles: Make sure there are no obstacles between the device and the target.
Use the Correct Unit: Ensure that you are using the correct unit of measurement for your project.

Press Mode Button until "Area" is displayed.
Measure length and width in sequence. The tool calculates and displays the area.

Q: Is it waterproof? A: No—it is IP54 rated for dust and splashes (light rain). Do not drop in water. Master Your DIY Projects: The Point-N-Measure Digital Tape

Power On: Turn the device on and select your preferred units (inches, feet, or centimeters). Use a Tripod or Stabilizer : For accurate

Press the ON/OFF button.
Press the Read/Measure button (often labeled with a "Read" or distinct icon).
The device will calculate the distance to the object opposite the tape. Ensure the back of the tool is flush against the starting wall or surface.