Raysharp+dvr+password+reset+top Instant

Here’s a strong, SEO-optimized blog post title and outline based on your keyword “raysharp dvr password reset top” — assuming “top” refers to a top method or top results.

1. Power down the DVR completely. Unplug the power adapter.
2. Remove the cover screws and slide off the top case to expose the motherboard.
3. Look for a small 2-pin or 3-pin jumper labeled CLR_CMOS, RESET, JMP1, or FACTORY.
4. If 2-pin: Short the two pins with a screwdriver for 10 seconds.
5. If 3-pin: Move the jumper cap from pins 1-2 to pins 2-3. Wait 10 seconds. Move it back to 1-2.
6. Reassemble the DVR and power it on.
7. The default credentials should now be:
   • You’ll see a string like GUID: XXXX-XXXX-XXXX.

   Reinsert and Boot: Put the battery back in, close the case, and power the unit on. Try the default passwords mentioned in Step 1. 5. Hard Reset Button or Jumper Pins raysharp+dvr+password+reset+top