top of page

Datasheet [cracked] Free - Sh1 94v0

You seem to be looking for the datasheet of the SH1 94V0, which appears to be a specific component or part, possibly related to electronics or electrical engineering. The "94V0" part hints it might be related to a UL (Underwriters Laboratories) rating, which often pertains to safety standards for components, particularly in terms of flammability and voltage.

Characteristics:

Input/Output: Typically 5V input with a stable 150mA output. Connector: 4-pin JST with a 2.0mm pitch. sh1 94v0 datasheet free

| Possibility | Explanation | |-------------|-------------| | Molded case mark on a component (e.g., transistor, diode, IC) | SH1 might be a date/lot code or a manufacturer’s internal marking. The actual part number is often different (e.g., S1H = diode). | | PCB material designation | Some Chinese PCB suppliers use SH1 as a batch code for FR-4 with 94V-0 rating. | | SH1 series connector or switch | Some manufacturers label a product series as SH1 (e.g., JST SH series connectors – but those are rated 94V-0). | You seem to be looking for the datasheet

UL 94V-0 PCB Manufacturing: Fire Safety Standards ... - HilPCB Current Rating: 1A Voltage Rating: 250V Fuse Type:

It is important to clarify that "SH1 94V-0" is not a specific part number for a single component, but rather a marking found on printed circuit boards (PCBs).

  • Current Rating: 1A
  • Voltage Rating: 250V
  • Fuse Type: Fast-acting
  • Package: SMD (Surface Mount Device)
  • 94V-0 rating indicates that the fuse meets UL (Underwriters Laboratories) 94V-0 standards for flammability

Key Electrical Features (General SH1 Series)

  • Forward Current (Io): Typically 1.0A to 1.5A
  • Peak Forward Surge Current (IFSM): Approx 30A to 50A (8.3ms single half sine wave)
  • Forward Voltage (VF): Usually 1.1V max at 1.0A
  • Reverse Current (IR): 10µA typical
  • Package Type: Most SH1 series components are housed in a SOD-123FL, SMA (DO-214AC), or SMB package.

The UL 94 Standard

Underwriters Laboratories (UL) created the "UL 94" standard to test the flammability of plastic materials. The "V" stands for "Vertical" burning test.

bottom of page