Sharp Ar-m165 Driver Windows 10 !!better!!
To install the Sharp AR-M165 on Windows 10, you generally need to SHARP AR-PB10 (GDI) driver or the Universal Print Driver
- Go to Settings > Devices > Printers & scanners > Add a printer or scanner.
- Wait for it to fail detection, then click “The printer that I want isn’t listed”.
- Select “Add a local printer or network printer with manual settings”.
- Choose “Use an existing port” (USB001 if connected via USB, or Standard TCP/IP Port if networked).
- In the driver list, select HP as manufacturer, then HP LaserJet 4 (or HP LaserJet 4000 series PCL5e).
- Complete installation and print a test page.
- Print the printer status/configuration page from the device to confirm network/IP and firmware revision.
- From Windows, print a test page and check duplex, resolution, and paper-size settings.
- Test scan-to-PC and scan-to-network folder if applicable.
The agency had finally upgraded its main scheduling PC from Windows 7 to Windows 10. The new operating system was sleek, fast, and secure. But when the office manager, Sarah, tried to print a 200-page lease agreement, the AR-M165 just sat there, its green "Ready" light blinking in silent defiance. sharp ar-m165 driver windows 10