13wmvl - Sp Furo
The code "sp furo 13wmvl" refers to a technical component or work procedure, most commonly associated with industrial safety governance and technical maintenance in environments like chemical plants or refineries. Industrial Application: Furfural Maintenance
In footwear retail, such codes generally break down as follows: sp furo 13wmvl
| Parameter | Typical Value | |-----------|----------------| | Power Rating | 1.3 kW – 1.5 kW (approx. 1.8 – 2 HP) | | Voltage / Frequency | 220–240V / 50Hz (single-phase) | | Max Flow Rate | Up to 400 L/min (24 m³/h) | | Max Head (Pressure) | Up to 15–18 meters | | Discharge Outlet | 2 inches (50 mm) or 3 inches (76 mm) threaded | | Max Solid Passage | 10–15 mm (clean/dirty water version) | | Impeller Type | Vortex or semi-open cast iron/brass | | Insulation Class | F (155°C) | | Protection Rating | IP68 (fully submersible) | The code "sp furo 13wmvl" refers to a
Maintenance
Routine (weekly/monthly)
- Visual inspection for leaks, corrosion, loose fasteners.
- Clean external surfaces and cooling fins.
- Check cable entry seals and strain relief.
Please be advised that during the latest performance review of the fluid handling system in Sector 4, the component identified as SP FURO 13WMVL was found to be operating below optimal efficiency. Visual inspection for leaks, corrosion, loose fasteners
Auto Restart: In the event of a power outage, the unit automatically resumes operation at the previous settings once power is restored.