Test Point Driver Huawei [extra Quality]

The Huawei Test Point Driver, officially known as the HUAWEI USB COM 1.0 driver, is essential for repairing "soft-bricked" or completely dead devices. It allows a PC to communicate with the phone’s processor (CPU) when the standard operating system fails to boot. 1. When to Use the Test Point

This is where the Test Point Driver (often the Huawei USB COM 1.0 driver) comes in. test point driver huawei

3. Board-Level Repair (Dead Boot/CPU Crash)

When the device suffers from a corrupt bootloader (XLOADER or ABOOT), the only recovery path is via the processor’s built-in ROM boot mode, activated by test points. The Huawei Test Point Driver , officially known

• Huawei_USB_Driver_xxx.exe
• Or the specific HCU/DC-Unlocker driver pack.

Phase 4: Flashing or FRP Reset

• For FRP: Using HCU → Click “Read Info” → If device info appears → Click “Reset FRP” → Done.
• For dead boot: Using IDT → Load XML firmware → Click “Download” → Wait for 15 minutes (do not disconnect).

Part 9: Future of Test Points on Huawei Devices

With Huawei moving to HarmonyOS and using newer Kirin chips (like the 9000S), test point methods are becoming obsolete for security reasons: Huawei_USB_Driver_xxx

If your PC shows "USB SER" instead of the proper COM port, follow these steps to manually update it: