The Ultimate Guide to the Tronxy XY-2 Pro Firmware Update: Boost Performance, Crush Bugs, and Unlock Features
By [Your Name/Expert Reviewer]
Baby Stepping (Live Z-axis adjustment during first layer)
M600 Filament Change (For multi-color prints)
Linear Advance (Pressure advance for sharper corners)
The Two Firmware Types
There is a massive confusion online: You have to update two separate chips.
Step 1: Format your SD Card
Updating the firmware is generally recommended if you experience: Performance Issues
(commonly Parameter version V2.0 for the CXY-V6-191017 motherboard) focuses on fixing issues like nozzle crashes and speed limitations. www.reddit.com Key Features of Firmware Updates
PID Autotune: Heat the bed to 60°C and nozzle to 200°C. Run M303 command via USB or use the LCD menu. Save with M500.
E-Steps Calibration: Mark 120mm of filament, extrude 100mm. Calculate new steps. The default Tronxy XY-2 Pro is usually E93; after update, it might revert to E95.
Mesh Bed Leveling: Run a 5x5 or 9x9 grid. Save to slot 0.
Z-Offset Wizard: Use a piece of paper. Negative values mean moving closer to the bed. (e.g., -1.20mm).
Title: Tronxy XY-2 Pro Firmware Update: The Safe Guide to Upgrading Your Printer
to unlock advanced features like "Live Z" adjustment during printing, better retraction control, and standard EEPROM management. System Identification
The Ultimate Guide to the Tronxy XY-2 Pro Firmware Update: Boost Performance, Crush Bugs, and Unlock Features
By [Your Name/Expert Reviewer]
Baby Stepping (Live Z-axis adjustment during first layer)
M600 Filament Change (For multi-color prints)
Linear Advance (Pressure advance for sharper corners)
The Two Firmware Types
There is a massive confusion online: You have to update two separate chips.
Step 1: Format your SD Card
Updating the firmware is generally recommended if you experience: Performance Issues
(commonly Parameter version V2.0 for the CXY-V6-191017 motherboard) focuses on fixing issues like nozzle crashes and speed limitations. www.reddit.com Key Features of Firmware Updates
PID Autotune: Heat the bed to 60°C and nozzle to 200°C. Run M303 command via USB or use the LCD menu. Save with M500.
E-Steps Calibration: Mark 120mm of filament, extrude 100mm. Calculate new steps. The default Tronxy XY-2 Pro is usually E93; after update, it might revert to E95.
Mesh Bed Leveling: Run a 5x5 or 9x9 grid. Save to slot 0.
Z-Offset Wizard: Use a piece of paper. Negative values mean moving closer to the bed. (e.g., -1.20mm).
Title: Tronxy XY-2 Pro Firmware Update: The Safe Guide to Upgrading Your Printer
to unlock advanced features like "Live Z" adjustment during printing, better retraction control, and standard EEPROM management. System Identification