Note: Since the actual manual for a specific "V2000-C" brand (e.g., HID, ZKTeco, or a generic OEM) is not publicly available in my training data, this report synthesizes standard features, safety protocols, and operational procedures common to standalone RFID access control panels.
| Issue | Common Solution | | :--- | :--- | | "Invalid Card" | The card is not registered in the device, or the ID format is incorrect. | | Door won't open | Check power supply (ensure 12V is stable) or check relay wiring (NO vs NC settings). | | Forgot Admin PIN | Perform a hardware reset (usually involves shorting specific pins on the motherboard or pressing a reset button inside the casing). | | Cannot read cards | Clean the sensor area. If using ID cards, ensure the device supports 125kHz frequency. | V2000-c Rfid Access Control User Manual
The V2000-C is a "Standalone" unit, meaning it does not require a constant network connection to work, but it can connect for management. Note: Since the actual manual for a specific
How long the relay stays activated.
| Action | Command |
|--------|---------|
| Enter programming mode | *MasterCode# (e.g., *123456#) |
| Change master code | 00 NewCode# RepeatNewCode# |
| Add RFID card | 11 CardNumber# (or present card after 11) |
| Add PIN user (ID 1–200) | 12 UserID# PIN# |
| Add card + PIN user | 13 UserID# → present card → enter PIN |
| Delete single user | 14 UserID# |
| Delete all users | 15# (use with caution) |
| Set relay duration (1–60s) | 03 Seconds# |
| Set door sensor mode (0=off,1=on) | 04 Mode# |
| Exit programming | *# | | | Forgot Admin PIN | Perform a
The V2000-C RFID Access Control System is a cutting-edge solution designed to provide secure and convenient access control for various applications, including office buildings, schools, hospitals, and more. The system utilizes RFID technology to grant authorized individuals access to designated areas, while preventing unauthorized entry.