Zastone D9000 Programming Software

Overview

The Zastone D9000 is a vehicle-mounted (mobile) two-way radio. Its programming software (CPS) lets you configure channels, frequencies, signaling (CTCSS/DCS), power levels, channel names, tones, scan lists, squelch, and other radio parameters from a Windows PC via a USB programming cable.

Interface Port: Be careful to plug the programming cable into the correct interface on the main unit to avoid damaging the device. zastone d9000 programming software

Connect the cable to the radio's mic jack (radio must be powered ON).
In the software, click "Settings" > "Comm Port." Select the COM port you noted earlier.
Click the "Read from Radio" button (usually a green arrow pointing down).
Wait for the "Reading..." progress bar. This ensures you keep the original frequency calibration data.

Progress bar: You should see a progress bar fill up. If it says "Failed," check your cable connection and COM port setting.

The Official Software Suite: The correct software is typically named "D9000-CPS.exe" or listed simply as "Zastone D9000 Programming Software." The current stable version as of 2024-2025 is v1.30 or higher. Overview The Zastone D9000 is a vehicle-mounted (mobile)

Final Checklist for Success:

If you’ve recently acquired this rig, you know that manually entering hundreds of repeaters and offset frequencies is a recipe for a headache. This guide will walk you through everything you need to know about getting your D9000 programmed and ready for the airwaves. Why Use the Programming Software? Connect the cable to the radio's mic jack

The Zastone D9000 programming software (often referred to as CPS or "HPG-68D") is the primary tool for managing the 512 memory channels and advanced features of this dual-band mobile transceiver. It allows you to bypass the often-complex front-panel menus for faster, bulk configuration. 🛠️ Key Software Features