Rok Power Washer Instructions ((hot)) Online

Operating a ROK power washer effectively requires a systematic approach to assembly, safety, and maintenance to ensure the longevity of the pump and engine. Whether you are using an electric or petrol model, following the correct sequence—especially regarding water flow—is critical to preventing immediate mechanical failure. 1. Pre-Operation Assembly and Setup

Nozzle selection & spray patterns (table)

• 0° (red): pinpoint; use for industrial tasks—high risk of surface damage.
• 15° (yellow): concentrated cleaning for tough stains.
• 25° (green): general cleaning (decks, sidewalks).
• 40° (white): wide fan for delicate surfaces and rinsing.
• Soap (black): low pressure for detergent application.

Nozzle Selection: Use the color-coded tips for specific tasks, ranging from the high-intensity red (0°) to the low-pressure black nozzle for detergent application. 2. Starting Your ROK Power Washer rok power washer instructions

High-Pressure Hose: Connect one end to the water outlet on the unit and the other to the spray gun. Operating a ROK power washer effectively requires a

Part 4: Maintenance Instructions for Longevity

Your ROK power washer will last for years if you follow these maintenance instructions after every 3-5 uses. 0° (red): pinpoint; use for industrial tasks—high risk

2. Assembly & Setup

Before you begin cleaning, set up the unit correctly:

Before Starting:

1. Regular cleaning: Regularly clean the power washer and its components to prevent clogging and damage.
2. Checking for leaks: Check the power washer and its components for leaks regularly.
3. Winterizing: Winterize the power washer by draining the water from the pump and hoses to prevent freezing and damage.

Lance & Nozzle: Insert the lance into the spray gun and twist 1/4 turn to lock. Attach your chosen nozzle (e.g., green for general cleaning, red for high-intensity) until it clicks.